The Sea to Summit Ether Light XT Insulated Mats featurie a women’s specific shape that is wider at the hip and narrower at the shoulder, Exkin Platinum® and a thicker THERMOLITE® insulative layer are combined with a loop baffle Air Sprung Cell™ construction to create a 10cm thick mat with an incredibly low weight. Larger air pockets are created by using many looped TPU baffles which connect the top and bottom fabric layers with our Air Sprung Cell™ dot weld pattern. The looped baffles allow the top and bottom layers to be positioned further apart creating larger pockets of air when inflated that require less fabric overall. Perfect for side sleepers, the extra height of this mat lets hips sink deeper into it without touching the ground. Features and Specifications Includes an Airstream™ Pump that is integrated into the stuff sack for quick and easy inflation Extra Thick (XT) loop baffle Air Sprung Cells™ Thicker THERMOLITE® layer for increased warmth Lightweight, quiet and grippy 30/40D Nylon fabric, field repairable with included self-adhesive patches Exkin Platinum® and THERMOLITE® for insulation Air Sprung Cells™ for a more comfortable sleep Ultra-Fresh® anti-microbial treatment to the TPU formula to prevent internal mould growth Multi-functional, high flow-rate valve PillowLock™ attaches your Aeros™ pillow to your mat, holding it in place for a slip-free sleep Length: 183 cm Width: 64 cm Inflated Depth: 10 cm Rolled Size:  11 x 24 cm R-Value: 3.5 Weight: 600 grams / 21.2 oz Number of Air Sprung Cells: 122 Includes: Airstream Stuff sack and repair kit   Frequently Asked Questions Q. WILL MOISTURE BUILD UP DAMAGE MY MAT IF I INFLATE IT WITH MY BREATH?A. Absolutely not. We have gone to extreme lengths to ensure that the fabrics and coatings that we have used in the construction of our Air Sprung Cell Mattresses can easily withstand the moisture build up that could occur from inflating them with your breath. We have also carefully treated our internal coatings to ensure that microbial life cannot replicate in a moisture rich environment, thus removing the chance that your mat may become moldy. Q. WHAT’S THE BEST WAY TO INFLATE MY AIR SPRUNG CELL MATTRESS?A. STS Air Sprung Cell Mattresses can be inflated in a number of ways. We have been very careful in using a TPU laminate on the internal face of the fabrics that has been manufactured with an anti-microbial treatment. This means that you are able to blow your mattress up by mouth without risk of mould growth inside the mattress. If you prefer not to huff and puff when setting up camp, we have created the Jet Stream Pump Sack and the Air Stream Dry Sack to make your life easier. Q. HOW DO I REPAIR MY AIR SPRUNG CELL MAT?A. Every mattress comes with a repair kit containing a number of patches. These self-adhesive repair patches can be used on holes up to about 2 mm in diameter with complete confidence. If you have a hold larger than this, please contact STS enquiries as to the best way to effect a repair. Q. WHAT DO I DO IF WATER OR MOISTURE GETS TRAPPED INSIDE MY MATTRESS?A. Having a small amount of moisture trapped inside your mattress is not a major issue, and the moisture will not damage your mat in anyway because of the anti-microbial TPU lining. You should, however, give your mattress an opportunity to dry out when you get a chance. The best way to achieve this is to hang the mat in a warm and dry environment with the valve open. Q. WHAT’S THE BEST WAY TO CLEAN MY STS MATTRESS?A. Mild soap and water is the best way to try and clean any dirt or grime off your mattress. The external coating on the face fabric will ensure that cleaning is quick and effective. Be careful not to use any strong cleaning products or bleaches, as these will damage the fabrics and potentially compromise the integrity of the mattress. Sea to Summit Ether Light XT Women's Insulated Inflatable Sleeping Mat - Large